Phone us on
02 9987 2006
or email us by clicking here

Condair ME Evaporative Humidifier & Cooler

The New Generation of evaporative humidifier

The Condair ME evaporative humidifier and cooler provides low energy humidity control and evaporative cooling and is mounted in an air handling unit or duct.

The ME series is very economical to run and a single unit can provide up to 1,000kg/hr of humidification and 630kW of evaporative cooling to an air stream while operating on less than 0.3kW of electricity.

Evaporative humidifiers provide humidification and cooling without any aerosols in the AHU. This means they can be situated in short section lengths without the risk of wetting on bends. As minerals left behind after evaporation are regularly flushed to drain, service requirements are considerably less than steam humidification.

Mains or RO treated water is pumped to the top of the evaporative module and flows down the corrugated surfaces of the evaporative cassettes. As air passes through the module it is humidified and cooled without droplets. Evaporative modules are custom built and can range in size from 600mm to 3,000mm wide and 625mm to 3,000mm high. Multiple systems can be combined for larger AHUs.

The self-contained hydraulic unit can be located either inside or outside the duct. Exterior mounting enables most servicing to be carried out without having to shut down and enter the air handling unit. Operating up to five low energy 32W pumps rather than single large pump allows proportional energy consumption to system output and provides up to five-stage control as standard.

The Condair ME incorporates an advanced touch screen controller that makes the system easy to use and set up, with software based commissioning. Information displayed includes settings, the current conditions of air humidity and temperature, as well as the water level, temperature and conductivity. Service requirements and fault warnings are displayed and recorded for future reference, and can also be downloaded via a USB connection. Intelligent Q&A-based trouble shooting guides walk the user through any issues to help identify problems and resolve them. The system can connect to a BMS via BACnet, Modbus and LonWorks protocols with optional PCB, and software updates can be updated via its USB port.


  • Very low energy consumption
  • High humidification & cooling duties from a single unit
  • Instant evaporation requiring very short section length
  • In-duct or externally mounted hydraulic unit
  • Up to five stage control as standard
  • Advanced touch screen control panel


  • Museums
  • Art Galleries
  • Concert Halls
  • Data Centres

BIM files are available for this product: click here

website designed by eroomcreative and built by JGDesign |